Design of electrically small wire antennas using a pareto genetic algorithm

We report on the use of a genetic algorithm (GA) in the design optimization of electrically small wire antennas, taking into account of bandwidth, efficiency and antenna size. For the antenna configuration, we employ a multisegment wire structure. The Numerical Electromagnetics Code (NEC) is used to predict the performance of each wire structure. To efficiently map out this multiobjective problem, we implement a Pareto GA with the concept of divided range optimization. In our GA implementation, each wire shape is encoded into a binary chromosome. A two-point crossover scheme involving three chromosomes and a geometrical filter are implemented to achieve efficient optimization. An optimal set of designs, trading off bandwidth, efficiency, and antenna size, is generated. Several GA designs are built, measured and compared to the simulation. Physical interpretations of the GA-optimized structures are provided and the results are compared against the well-known fundamental limit for small antennas. Further improvements using other geometrical design freedoms are discussed.     

Static strength of collar plate reinforced CHS X-joints loaded by in-plane bending

This paper presents the collar plate reinforcement scheme to strengthen a Circular Hollow Section (CHS) X-joint, applicable for a fabricated joint which is subsequently found to be under-strength. The parametric numerical study on the static strength of collar plate reinforced X-joints loaded by in-plane bending is complementary to the study on doubler plate reinforced joints as reported in the companion paper. The load transferring mechanisms and failure modes of these reinforced joints are investigated and compared. From the range of geometric parameters investigated, the collar plate reinforcement is found to be more effective than its doubler plate counterpart to improve the static strength of the joints. Based on the numerical results, strength equations are established to estimate the static strength of collar plate reinforced X-joints.     

An interactive lung field segmentation scheme with automated capability

Feasible clinical application of any automated segmenting methodology demands more than just accuracy. Amendment to the automated delineation is necessary when the algorithm fails, however, integrated solution to such a scenario is largely absent in literature. Hence in this survey we devised an architecture that does both the automated and interactive lung field localizations using a single segmenting engine—random walker algorithm—so that intuitive amendment is only necessary when the automated generated delineation is unsatisfactory. The algorithm proceeds by first extracting 18 intensity profiles running horizontally, each of them equally spacing apart, and in each intensity profile three extreme points denoting the two lungs and the esophagus are determined through profile matching. This done, the algorithm removes profiles that do not intersect with the lung, and the rest of the extreme points are plugged into random walker algorithm to perform segmentation. The achieved accuracy in localization by the above was 0.8875 in terms of overlap measure (the maximum value for this parameter is 1) over 341 images. In the case where unsatisfactory delineation prompts amendment necessary, the user can interactively segment the lung by just a shift on some of the previous-determined points to the desired locations, and random walker algorithm is run again with the amended input. By such a fusion, the benefits of both the automated and interactive segmentation are shared in a single architecture.     

Automatic generation and refinement of hypertext links

Abstract

Current generation of hypertext systems suffer from the limitations that they are static in nature, and they do not support the automated process of link creation very well. Because of the efforts involved in manually creating links, the hyperbases created using these systems are seldom modified even when they were found not to fully support the requirements of the intended users. This paper studies the development of automated tools to aid in the process of link creation, browsing, and link refinement. Only relation links are considered in this study. The automated tools are developed to help in three of the major stages of developing and using hypertext applications: (a) during authoring to generate a set of relation links between pairs of nodes; (b) during browsing to recommend an optimal set of starting nodes for the users to begin browsing, and to guide the users at each stage of browsing by suggesting a set of “next” nodes to traverse; and, (c) during training to modify, remove and add links based on users' feedback data collected. The training will result in long-term changes in the hypertext structure.

In order to test the effectiveness of the training process objectively, a navigator is built to simulate the browsing activities of the users. The effects of training have been evaluated on two text collections using a variety of objective measures. The results indicate that the training process has improved the effectiveness of the hyperbase to support browsing.     

Influences of Ta, Nb, or Mo additions in Zr-based bulk metallic glasses on microstructure and thermal properties

The master-alloy ingots for casting bulk metallic glasses are routinely prepared by arc melting a mixture of pure elements. This paper addresses the difficulty in achieving complete and homogeneous melting of refractory component additions in Zr-based BMGs using the above procedure, and its influences on the microstructure and thermal behavior of alloys.     

Separation of crude palm oil components by semipreparative supercritical fluid chromatography

Successful separation of triglycerides, diglycerides, free fatty acids, carotenes, tocopherol, and tocotrienols from crude palm oil has been achieved by supercritical fluid chromatography (SFC) with a combination of a C18 and a silica gel column. The separation was carried out by the programmed extraction elution method. Free fatty acids were separated into five components by gas-liquid chromatography; tocopherol and tocotrienols were also separated into four components by SFC analysis, and the pure fractionated carotenes were obtained by preparative SFC. Thus, by using supercritical fluid chromatography, crude palm oil components can be separated and fractionated, based on differences in their functional groups.     

Effect of calcination temperature on the characteristics of SO<Emphasis Type="Italic">sk</Emphasis>4/2-/TiO<Subscript>2</Subscript> catalysts for the reduction of NO by NH<Subscript>3</Subscript>

The catalytic activity of sulfated titania (ST) calcined at a variety of temperatures has been investigated for selective catalytic reduction (SCR) of NO by NH₃. The NO removal activity of ST catalyst mainly depends on its sulfur content, indicating critical role of sulfur species on the surface of TiO₂. The role of sulfur is mainly the formation of acid sites on the catalyst surface. The presence of both BrØnsted and Lewis acid sites on the surface of sulfated titania has been identified by IR study with the adsorption of NH₃ and pyridine on ST. The reduction of the intensity of IR bands representing BrØsted acid sites is more pronounced than that revealing Lewis acid sites as the calcination temperature increases. It has been further clarified by IR study of ST500 catalyst evacuated at a variety of temperatures. The NO removal activity also decreases with the increase of the catalyst calcination temperature. It simply reveals that BrØnsted acid sites induced by sulfate on the catalyst surface are primarily responsible for the enhancement of catalytic activity of ST catalyst containing sulfur for NO reduction by NH₃.     

Tensile strength and morphological investigation of SiC-coated carbon fibers

SiC-coated film onto carbon fibers as a barrier of oxidation resistance and reaction between carbon fibers and metals was investigated. The chemical vapor deposition of silicon carbide onto carbon fibers was performed at various temperatures ranging from 700 to 1000°C using triisopropylsilane vapor carried by hydrogen gas. The strength of the SiC-coated carbon fibers was decreased due to deterioration of fibers and chemical attack of hydrogen on the surface of carbon fibers during the coating process. The oxidation and the thermal resistance of the SiC-coated carbon fibers compared to the uncoated carbon fibers were improved at temperature range of 600–800°C and 1000–1200°C, respectively. Morphological change by air oxidation at temperature range of 500–800‡C was also investigated for the SiC-coated and the uncoated carbon fibers, respectively. The SiC-coated film between carbon fiber and aluminum was sufficient as a barrier of reaction on carbon fiber reinforced aluminum at temperature of above 1000°C.     

Efficient revocable ID‐based encryption with cloud revocation server

The capability to efficiently revoke compromised/misbehaving users is important in identity‐based encryption (IBE) applications, as it is not a matter of if but of when that one or more users are compromised. Existing solutions generally require a trusted third party to update the private keys of nonrevoked users periodically, which impact on scalability and result in high computation and communication overheads at the key generation center. Li et al proposed a revocable IBE scheme, which outsources most of the computation and communication overheads to a Key Update Cloud Service Provider (KU‐CSP). However, their scheme is lack of scalability since the KU‐CSP must maintain a secret value for each user. Tseng et al proposed another revocable IBE scheme with a cloud revocation authority, seeking to provide scalability and improve both performance and security level. In this paper, we present a new revocable IBE scheme with a cloud revocation server (CRS). The CRS holds only one secret time update key for all users, which provides the capability to scale our scheme. We demonstrate that our scheme is secure against adaptive‐ID and chosen ciphertext attacks under the k‐CAA assumption and outperforms both schemes mentioned above, in terms of having lower computation and communication overheads.     

Development of an Electroosmotic Pump Using Nanosilica Particle Packed Capillary

High-pressure electroosmotic pumps (EOPs) operate on the principle that electroosmotic flow (EOF) can be generated through a packed-bed capillary by applying an electric field through it. In this paper, a novel packed-bed EOP design using nanosilica particles is described. The packed-bed capillary was fabricated using a capillary of 5 cm x 530 mum i.d. close packed with silica particles having an average particle size of 20-30 nm. The flow rates, pressures and pressure/flow rate (P-Q)characteristics, electric properties of the pump and the influence of phosphate buffer concentration on the pump were carefully studied. By increasing the pressure, decreasing the applied voltage, and the electric current, the thermodynamic efficiency was about 1%-2% for inorganic buffers and 3%-5% for organic solvents or their mixture without ions.